Guide Bush | Closed

Guide Bush N570

产品货号 5009010

  • Stop rings and wiper seals fixed on both sides.
  • The closed guide bush and integrated ball cage form a separate component.
  • Guide bore diameter d1 is finely honed to ISO tolerance IT 3, Rz 0.5 – 1.5 μm depending on diameter.
  • Roundness within 1/3 ISO-IT 3.
  • Cylindricity within IT 1.
  • Radial run-out of a shaft inserted under preloading is within 0.0005 mm.
  • Outside diameter dB h6 with radial run-out error within IT 4, ground to guide bore diameter d1.
  • Outside diameter with circlips DIN 471 for installation of the guide bush in the location bore.
  • The maximum stroke path Hmax is determined from the length of the guide bush l3 and the length of the ball cage l2: Hmax = 2 (l3–l2).
  • See catalog page 37-41 for instructions on installation and servicing.

For detailed information please select an item.

Other dimensions or designs based on workpiece drawings are available.
These can also be produced using stainless steel (1.4112).

Rotary stroke bearing consisting of:
Guide bush N 570/dw/d1/l1 Order No. 5009 . . .
Ball cage N 501/dw/d1/l2 Order No. 50010 . .
or
Ball cage N 500/dw/d1/l2 Order No. 50000 . .

Guide Bush N570
Guide Bush N570

Einpressen vermeiden!

Durch Einpressen wird der mit sehr hoher Genauigkeit gefertigte Führungsdurchmesser d1 verformt. Die Buchse passt sich der Aufnahmebohrung an. Formfehler und erhöhte Vorspannung sind die Folge. Die Funktion der Kugelführung wird auf jeden Fall negativ beeinflusst.
Befestigung der Führungsbuchse
Die Kugeleingriffsstrecken werden von der gegenseitigen Lage von Führungsbuchse, Kugelkäfig und Führungswelle in der Hubendstellung bestimmt. Das Zusammenspiel der Baulängen l1 und l2 während der Bewegungsabläufe über den Hub bedingt unterschiedliche Betriebsarten.
Auslegung und Berechnung
Weitere Abmessungen oder Ausführungen sind nach Werkstück-Zeichnung lieferbar, auch aus nichtrostendem Stahl (1.4112).
MarMotion N570 | 物品号: 5009010
材料
材料编号 1.3505 (AISI E52 100)
热处理 通过硬化
恒定工作温度 100 °C
轴直径 (dw) 15 mm
导套内径 (d1) 21 mm
导套长度 (l1/L) 92 mm
导套内尺寸 (l3) 74 mm
导套外径 (dB) 30 mm
外径公差 h6
弹形挡圈距离 (e) 66 mm
宽度 (m) 8 mm
距离 (n) 19 mm
尺寸 dw 15 | dB 30 | l1/L 92 | d1 21 | l3 74 | e 66 | m 8 | n 19
图纸尺寸 1
返回顶部